Touratech Suspension Shock Absorber For Honda Africa Twin Rd07 Xrv750 Ab 1993 Type

  

Touratech suspension damper for Honda XRV750 Africa Twin RD07 ab 1993 category. This product page has been automatically translated.

If you have questions, feel free to contact us. Motorcycle accessories and spare parts for BMW and many others .. damping suspension for Touratech XRV750 honda africa twin RD07 from 1993 highend kind. A vibration absorber for Touratech. Honda XRV750 Africa Twin RD07 from 1993 highend kind.

This high damping range for XRV750 honda africa twin is fully developed for tourism and driving with load conditions and conduct frequent and highly changeable. Rear pannier luggage system to charge and / or the passenger, each type of charge can be offset by the wide range of adjustment. The balance of the bike can be easily and quickly by driving about hydraulic preload spring to be restored by you. The finely adjustable damping on the expansion tank allows adjustment of effective and precise suspension adapted to your personal driving style for each state of the road and every goal, whether bab / highways, federal highways, the smaller country roads, sections off-road, long trips with heavy luggage or a bright and ambitious driving style.

You will experience a completely new driving experience with your bike. => The damper is configured on the basis of our experience to the XRV750 honda africa twin and is ready to roll. => The parameters: vehicle weight / articulation of the shock absorber / structural conditions / test drives. => The damper mentioned here is designed for the rider's weight up to 100 kg, including luggage.

=> The back and the front of the bike must be adapted to allen suspension solutions. => The right component for the front of the XRV750 honda africa twin is here. => If only one component is exchanged, an optimal driving behavior is not achieved.

Properties of the high damping range Touratech suspension. => Leg housing the force is aluminum. This results in the lowest possible weight. => All parts and components are designed for intensive use with heavy touring bikes.

=> Special low-friction seals are installed. This means very little wear and a long life for the damper. => Stable sockets in stainless steel for the fixing screws are incorporated into the eyelet of the strut.

The result is a stable seat and without playing the fixing screws, even under the highest loads. => Design of the separating piston. This allows fluid damping oil and nitrogen run separately. Consequently, high damping performance and precise even with a very high damping frequency (bad road slopes).

Better cooling of the damper. Weaker restrictions on the damper installation position on the bike.

=> Hydraulic preload premium spring via an easily accessible driving. => Dampers settings have been developed based on experience and Touratech requirements. => The base is many kilometers and experience of the Touratech race team operations. => The damping setting of the high-end compression can always be set separately on the high and low speed. Consequently, very individual adjustment of the compression stage / rebound. Perfect adaptation to changing requirements. => For high-range separate expansion vessel in the pumping element of the damper.

Best cooling damping when driving. Consequently, a higher load capacity and a longer lifetime of the shock absorber. => Qr barcode on the damper with the individual information on the damper. This facilitates the call specific information dampers in the scanning with the smartphone.

Information on the damper basic settings are always available. Reset possible with an incorrect setting. If you have installed a larger tank than the original tank on your bike or if you have conversions for. Adjustments are possible if you have made a luggage on your motorcycle.

The strut is then manufactured by us. Individually adapted to your needs thanks to a spring with a greater stiffness please use for this. And send us the completed form. We are happy to advise you in person.

All items will be sent quickly and reliably by DHL after receipt of payment. Not sure that the piece fits? More than 10,000 reviews. With more than 10,000 customer reviews, you can be assured that you get the best service. In our jumiparts shop, we have a lot of other parts and accessories for your motorcycle!

Suspension damping Touratech for Honda XRV750 Africa Twin RD07 from 1993-type highend description of the important article in brief: => leg housing the force is aluminum. Authorized reseller 100% better balanced payment services customer first over 10,000 opinion giant selection. The item \shock absorbers \The seller is \This article can be shipped worldwide.

1. Country of Manufacture: Germany <\/ li>
2. Mounting position: Front <\/ li>
3. manufacturer part number: 1005-01-058-0011-0 <\/ li>
4. Manufacturer: Touratech <\/ li>
5. brand - no brand / generic - <\/ li> <\/ Ul>